| Last Modified: 11-29-2007 | 1.6 G | |
| Service Category: Vehicle Interior | Section: Heating/Air Conditioning | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000022AR00LX |
| Title: HEATING / AIR CONDITIONING: RELAY: ON-VEHICLE INSPECTION (2008 Sequoia) | ||
ON-VEHICLE INSPECTION
1. INSPECT MAGNET CLUTCH RELAY
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
3 - 5 |
When battery voltage is not applied |
10 kΩ or higher |
|
3 - 5 |
When battery voltage applied to terminals 1 and 2 |
Below 1 Ω |
If the result is not as specified, replace the relay.
2. INSPECT CONDENSER FAN RELAY
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
3 - 5 |
When battery voltage is not applied |
10 kΩ or higher |
|
3 - 5 |
When battery voltage applied to terminals 1 and 2 |
Below 1 Ω |
If the result is not as specified, replace the relay.
|
|